Geotechnical Compaction Report

Report Name: Geotechnical Compaction (example)

File Name: EarthSoft.Reports.Library.176839.dll

Dependencies: Licensed EQuIS Geotech and Geotechnical Schema

Software: EQuIS Professional and Enterprise

Source: EQuIS Geotech (EarthSoft Community Center > Products > EQuIS Geotech)

Language: English

Output Type: Excel1 or PDF

Description: The Geotechnical Compaction report plots the Water Content and Dry Density results of a Compaction test on a standard compaction plot. The standard compaction graph includes the curves of 100% Saturation for Specific Gravity equal to 2.80, 2.70, and 2.60. The X- and Y-axis of this report behaves in a dynamic manner based on the range of data being plotted. This report filters the results based on the selected task and will only display samples that have an associated DT_GEO_TEST table record where DT_GEO_TEST.TEST_TYPE = ‘Compaction’ and 'Compaction_Readings’. This report can be run in EQuIS Professional or published to EQuIS Enterprise.

Installation Instructions: This report requires an EQuIS Geotech license and the Geotechnical Schema applied to the database. The Geotechnical Compaction report (EarthSoft.Reports.Library.176839.dll) is available for download in the Products\EQuIS Geotech folder on the Downloads Dashboard on the EarthSoft Community Center. For Enterprise use, this report should be published to the database. When publishing the report, the assembly should be stored in the database. The report will be available for selection once it has been published.

Additional Details:

The Geotechnical Compaction report plots the following items:

•The X and Y grid lines of the graph.

•The water content (DT_GEO_RESULT.GEO_RESULT_CODE = ‘Compaction_WC’ where DT_GEO_TEST.TEST_TYPE = ‘Compaction_Readings’) and dry density (DT_GEO_RESULT.GEO_RESULT_CODE = ‘Compaction_DryD’ where DT_GEO_TEST.TEST_TYPE = ‘Compaction_Readings’) results for a sample on a Dry Density vs. Water Content plot.

•The Curves of 100% degree of Saturation (Zero Air Void (ZAV) lines) for Specific Gravity values equal to 2.80, 2.70, and 2.60.

Once the gridlines, test reading results, and ZAV lines are plotted on the graph, the report connects the reading results by a solid line of best fit. In samples where an oversize limit is supplied, the report will calculate the corrected water content and dry density reading values and plot the corrected results on the graph in the same color as the uncorrected results, but with a dashed line.

The report dynamically applies a 10% buffer above and below the maximum and minimum Y data point values.

The report determines whether to correct the data based on if the following parameters are populated in the database for the selected sample:

•DT_GEO_TEST_PARAMETER.PARAM_CODE = oversize_limit

•DT_GEO_RESULT.GEO_RESULT_CODE = ‘percent_finer’ associated with DT_GEO_RESULT.GEO_RESULT_CODE = ‘sieve_diameter’ that equals the oversize_limit value

This report supports task_code based paging.

Template:

The Geotechnical Compaction report is designed to use a selected Microsoft Excel template.

Note: The EarthSoft_Compaction.xlsx template file is provided with EQuIS Geotech. See the Geotechnical Template Configuration article for detailed information on editing/creating Excel templates for use with EQuIS Geotech reports.

In addition to the Shared Attributes detailed in the Shared Report Attributes article, the following Excel Name Manager fields are specific to the Geotechnical Compaction report.

Excel Name Manager Field	EQuIS Source	Description
optimum_wc	DT_GEO_RESULT.GEO_RESULT_CODE = ‘optimum_watercontent’	Optimum water content of a sample
max_dd	DT_GEO_RESULT.GEO_RESULT_CODE = ‘maximum_dry_density’	Maximum dry density of a sample
optimum_wc_corrected	Calculated	The corrected optimum water content when oversized particles are present
max_dd_corrected	Calculated	The corrected maximum dry density when oversized particles are present
test_method	DT_GEO_TEST.TEST_METHOD associated with DT_GEO_TEST.TEST_TYPE = 'Compaction’	The test method used to conduct the Compaction test

Tables: DT_GEO_RESULT, DT_GEO_TEST, DT_GEO_TEST_PARAMETER, DT_LOCATION, DT_SAMPLE, DT_TASK

Report Parameters

Location
Individual(s)	Parameter for selecting individual locations.
Group(s)	Parameter for selecting location groups.
Task(s)	Parameter for selecting task code(s).
Excel Template	Parameter for selecting Excel template. The report searches the DT_FILE table where DT_FILE.PLACE_TYPE = ‘Compaction’.
Override Template (EQuIS Professional Only)	Parameter to enter the full file path to use a local override template. This parameter is only available in EQuIS Professional.
Output File Type	Parameter for selecting the output file type. The options are PDF or Excel.

1Excel report output requires a valid license of Microsoft Excel to view the output.